Pulsed Laser Deposition system

Versatile_Pulsed_Laser_Deposition_and_Thermal_Evaporator_system

 


 

PLD – T, Versatile Pulsed Laser Deposition, and Thermal Evaporator system


PLD – T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and thermal evaporation technique. It can deposit complex materials and crystalline structures onto substrates with very little setup involved

 

Pulsed Laser Deposition technique leads to efficient, none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides, oxides, superlattices, polymers, composites.

Features

  • Target manipulator with adjustable rotation speed.
  • 3 thermal sources and special feedthrough.
  • The quartz crystal monitoring system for real-time thickness measurement (1 nm precision).
  • Intuitive touch screen to control the coating process and rapid data input.
  • User-friendly software that can be updated via the network.
  • Equipped with a rotary sample holder.
  • Equipped with electronic shutter.
  • Equipped with motorized boat selection.
  • 500 °C substrate heater.
  • Two-year warranty.


Thermal evaporation sources (Boat / Basket / Coil) and Target Manipulator

 

The PLD - T can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination transfer from sources materials to other materials. The length of source holders can be adjusted in the range of 10 – 5 cm which meets the customer requirement.

 PLD – T is equipped with a multi-target manipulator which includes three 2 cm diameter. targets as standard. All of our target manipulators are motorized and includes target rotation.

PLD_Target_Manipulator PLD_thermal_evaporation_sources

 

 

Vacuum Chamber

The vacuum chamber is a 300 mm OD x 250 mm H, stainless steel with four 2'' windows

Considering that the energy source (pulsed laser) is outside the deposition chamber, PLD technique is the extremely clean process for thin film deposition and it facilitates a large dynamic range of operating pressures.

 

Touch screen control with colorful display

 

 The system is equipped with a 7'' colored touch screen and fully automatic control and data input that can be operated by even inexperienced users. The vacuum, current and deposition information can be observed as digital data or curves on the touchscreen. Information of the last 300 coatings can be saved in the history page. 
desk sputter coater Touch screen control with colorful display touch screen software-pld-T

 

 

 

Specifications

  • High vacuum turbo pump 300 l/s.
  • Diaphragm backing pump.
  • Full range vacuum measuring gauge.
  • 2.5 KW High current power supply.
  • Precision Mass Flow meter (MFC).
  • Able to record and plot coating parameters graphs.
  • Transfers the curves and deposition process data by USB port to PC.
  • Box Dimensions: 50 cm H x 60 cm W x 47 cm D.
  • Shipping weight:


Options and Accessories

The PLD -T has the flowing options and accessories:

 

  • Thermal evaporation sources (Boat, Basket, and Coil).
  • Evaporation sources materials.
  • Quartz crystal

 

 


Pulsed Laser Deposition system